Jetway-computer JBC231C9P-2550 Manual de usuario descargar pdf (Pagina 30)

USB hardware delays and time-outs:

USB Transfer time-out

Use this item to set the time-out value for control, bulk, and interrupt transfers.

The optional settings are: [1 sec]; [5 sec]; [10 sec]; [20 sec].

Device reset time-out

Use this item to set USB mass storage device start unit command time-out.

The optional settings are: [10 sec]; [20 sec]; [30 sec]; [40 sec].

Device power-up delay

Use this item to set maximum time the device will take before it properly reports

itself to the host controller. ‘Auto’ uses default value: for a root port it is 100 ms, for

a hub port the delay is taken from hub descriptor.

The optional settings: [Auto]; [Manual].

Select [Manual], user can set value for the following sub-item:

Device Power-up delay in seconds:

The delay range in from 1 to 40 seconds in one second increments.

► Super I/O Configuration

► COM1 Port Configuration

Press [Enter] to make settings for the following items:

Serial Port

Use this item to enable or disable serial port (COM).

Change Settings

Use this item to select an optimal setting for super IO device.

► COM2 Port Configuration

Press [Enter] to make settings for the following items:

Serial Port

Use this item to enable or disable serial port (COM).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Jetway-computer JBC231C9P-2550 Manual de usuario Pagina 30